Skip to main content

4-wheel forestry and groundskeeping machine

The W130 is Welte’s compact, high-performance, all-purpose machine. This combination clam bunk skidder, crane and winch is ideally suited for groundskeeping work. The machine is extremely fast and maneuverable. Upon request, it also comes with the new SIB drive for seamless distribution.

Technical specification:


Volvo Penta 4-cylinder Motor, water-cooled
140 kW (190 DIN PS) at 1,700 - 2,100 RPM
torque max. 840 Nm at 1,200 - 1,500 RPM
emissions stage TIER 4 final, with SCR catalytic converter
displacement 5,130 ccm
electronically controlled Ventilator drive/Cleanfix as an option
fuel tank capacity approx. 170 litre
AdBlue® tank 25 litre

Working hydraulics

load-sensing hydraulic system
regulating pump with 280 l/min at 2,100 RPM
system pressure up to 380 bar
biodegradable hydraulic oil, 290 l
Power transmission - SIB
hydrostatic power unit with 2-gear Transmission, which can be switched when driving (SIB)
planetary axles with multi-disc brakes running in oil bath
front and rear 100% separated switchable differential locks
dual-circuit braking system, spring-controlled parking brakes
three drive mode stages which can be switched when driving
crawler gear, driving with fixed speed, driving with reduced speed


1st gear 0 - 12 kph
2nd gear 0 - 40 kph
Electrical system
system voltage 24 V
battery power 2 x 95 Ah
alternator 110 A


articulated steering
steering movement +/- 46°


panoramic tilting cab
ROPS, FOPS, OPS and OECD tested
2 complete entry and exit access ways for your safety
unobstructed 3-part angled Lexan-MARGARD rear windscreen in the rear hazard area with panoramic screen
opening side window
extremely quit comfort cab
all-round LED lighting (10 off)
swivel seat which can be rotated mechanically or electronically
colour display with setting options for 5 Drivers
radio with USB and Bluetooth hands-free device
classy and practical appearace
12/24 V sockets
2 convex interior mirrors
steering wheel which is height and angle adjustable and can be folded down


example: 28L-26 Trelleborg T418 in front and rear


front frame in stable box profile with integrated hydraulics and fuel container
rear frame in stable box-section construction
stable central joint with tapered roller bearings
torsion block through hydraulic cylinder, automatically and manually switchable
all floor pans on the underside are hinged or can be unscrewed for maintenance work


Epsilon, Loglift and others

Forestry Accessories

front blade
HZM 14 double-drum winch with up to 14 t total pulling force (may also be set higher)
alternatively, HZM 15 double-drum winch with up to 16 t total pulling force (may also be set higher)
height-adjustable rear plate with two rope pulleys

... odkaz na stránky výrobce Welte Fahrzeugbau GmbH