Skip to main content

Maximum safety - use of more machines at the same time

 

pdf brochure
t-winch 30.2 brochure

 

Sustainable cultivation means taking care and use of forest areas in a way that maintains or even improves the terrain`s productivity with its output, its regeneration ability and its vitality.
With the help of a traction winch the whole braking power and tractive force of the timber harvesting machine can be supported in slope transition terrain at any time. Serious damage to the soil is reduced because of a slip value of less than 20%, which makes it easier to systematically develop logging trails.

SAFETY AS A BASIC PRINCIPLE
Within the last years the development of lighter forestry machines, due to the use of new tensile steels, has contributed to the fact that the limits of passable slopes has steadily increased upwards.
In order to guarantee the safe use of machines in such steep terrains the timber harvesting machine has to be adjusted to the expected field of operation, taking into account the slope gradient and changes in weather conditions. The traction winch can significantly contribute to safe working provided that the machine itself is placed in a stable position, including the machine`s own braking efficiency.

WITH THE USE OF T-WINCH NO UNDESIRABLE REAR WEIGHT
and no structural alteration works of the basic machine are required. Irrespective of the decision which machine is used for working on steep terrain, a maximum of safety is provided together with a minimum of installation work.
INDEPENDENT STEERING ALONG FOREST ROADS IS POSSIBLE BY UNCOUPLING THE ROPE
An easy release of the safety rope ensures the possibility of leaving the logging trail at any time. A remote storing of the timber, somewhere along the forest road can therefore be achieved easily.

MAXIMUM SAFETY PREVENTING ROPE BREAKAGE
USE OF MORE MACHINES AT THE SAME TIME

T-WINCH 30.2 is always a valuable assistance to safe working.

Dimensions:

Lenght: 6150 mm 
Width:   2990 mm 
Height:  2980 mm 
Chassis clearance:  514 mm
Weight:   33 000 kg 


Engine:


Diesel engine:    FPT C87 Tier5
Max. output:       305 kW / 414 HP
Fuel tank:            625 l 


Hydraulics:


Winch pump:      1 x 280 ccm 17.1 cu.in.
Winch Drive:       1 x 170 ccm 10.4 cu.in.
Open Pump:       1 x 190 ccm 11.6 cu.in.
Oil volume:          350 l 74 gal.


Operating pressure:     

  
Chassis:                   320 bar
Winch pressure:     460 bar


Winch:


Max. Pulling Force :        250 kN 27,5 t
Max. Pulling Speed:        8 kph 5 mph
Rope diameter:               26 mm 1.06"
Rope length:                    560 m 1840 ft

 

 

English